Mo Yijie R-99 additive release agent series

Composition: metal soap - based mixtures of synthetic surfactants

Exterior view: white powder or particles

Storage time: two years

Packing: composite kraft paper woven paper bag

Net weight: 25 kg/bag

Applicable adhesive type:

Natural rubber (NR), butadiene rubber (BR) and styrene butadiene rubber (SBR), isoprene rubber (IR), chloroprene rubber (CR), butyl rubber (IIR), EPDM (EPDM), chlorosulfonated polyethylene rubber (CSM), fluoro rubber (FKM), acrylonitrile butadiene rubber (NBR), and reclaimed rubber, can be used in tires and other moulding, Extrude the product. It is mainly recommended to be used in recycled rubber inner tube (power tire, light truck tire, agricultural tire).

Usage:

Mo Yijie R-99 is added at the same time as the material during mixing. It can be effectively demoulded without using external demoulding agent. It can be effectively demoulded without using external demoulding agent.

Featured performance:

1. Compared with other demoulding agents, MOyijie R-99 has a high cost performance ratio, which is suitable for rubber products with cost requirements of customers. Under the premise of ensuring effect and performance, it can provide customers with as much profit as possible. After adding mould Yijie R-99, the mould can be effectively demoulded without using external demoulding agent, automatically keep the mould bright, effectively avoid dirt corrosion of the mould, and prolong the service life of the mould.

2. Add mold Yijie R-99 rubber in vulcanization mold and rubber between the formation of a melting film, can effectively fuse the impurities and unknown components produced in the vulcanization, prevent impurities adhere to the surface of the mold, reduce mold dirt.

3. Add mold Yijie R-99 glue material can effectively avoid the use of external release agent caused by air, lack of glue phenomenon, greatly improve the qualified rate of the product.

4. Add MOyijie R-99 in appropriate proportion, not only does not affect the hardness and tensile strength of rubber products, but improve the chemical properties of acid and alkali resistance, oil resistance, water resistance and oxidation resistance of finished products, and have a colorful effect on the color rubber. Enhance rubber products toughness, strength, wear resistance, eliminate stains.

5. Mo Yijie R-99 has the function of dispersion and flow improvement; It can improve the speed of pressing out, increase the surface finish of pressing out, reduce the phenomenon of spraying frost and prevent the burning of glue.

Recommended dosage:

It is determined by the complexity of the mold shape and the degree of fouling and scaling of the mold:

Ordinary rubber: NR, SBR, BR, IR, etc., according to the raw rubber volume of 1.0~3.0%

Halogenated rubber: such as CR, NBR, FKM, according to the raw rubber volume of 2.0~5.0%